Revers Osmosis Alfa Series

AQUALINE ALFA SERIES  REVERSE OSMOSIS SYSTEMS

1 m3/day to 30 m3/day
Reverse Osmosis is the membrane filtration process for obtaining pure water, which separates all unwanted minerals from water, applied to waters where conventional treatment systems are insufficient (seawater, water with high conductivity, well waters, etc.). This process continues until osmotic equilibrium is achieved. Reverse osmosis is the reversal of this osmotic flow. Aqualine reverse Osmosis Systems successfully ensures that pure water is obtained as a result of this process. In addition, Aqualine Reverse Osmosis Systems can be produced in different design styles according to customer requests.

STANDARD FEATURES

  • Membrane vessels FRP or Stainless Steel
  • TFC spiral wound membranes 2,5’’ or 4’’ diameter
  • SS304 stainless steel vertical centrifuge high pressure pump (available in between ALFA 340/440/540/640) 
  • Brass body rotary type high pressure pump (available in between  ALFA125/140/240)
  • SS304 stainless steel frame
  • 5 micron cartridge filter
  • Low and high pressure pipings U-PVC / Zonder PN20
  • Inlet solenoid valve​
  • Pressure adjustment valves in Pump outlet and waste water line​
  • Low and high pressure switches ​
  • Product water and waste water flowmeters 
  • Reverse cycle flowmeters (Only available in Alfa 340/440/540/640)
  • Gliserin Filled Manometers
  • Product Water Conductivity Meter (0-2000µS/cm)
  • Autoflush System
  • On-Off switch
  • RO Electronic Control Card, Alarm and Position Indicators
  • 220 V/50Hz/1ph ( between ALFA 125/140/240)
  • 380 V/50Hz/3ph ( between ALFA 340/440/540/640)
  • IP56 Control Panel

INLET WATER LIMITS

DOCUMENTS
  • ​Inlet water TDS: 0 - 2,000 ppm
  • Inlet water pressure: 2 to 5 bar
  • Inlet water pH range: 6-8
  • Silica (SiO2) Tolerance: Maximum 25 ppm
  • Minimum and maximum inlet water temperature (10ºC - 30ºC)
  • Maximum Iron (Fe) tolerance: 0.05 ppm, if ASC is dosed 0.2 ppm
  • Hydrogen Sulfide should not be.
  • There should be no turbidity (NTU <1)
  • No oil or grease
  • SDI <5
  • There should be no microbiological pollution