Reverse Osmosis Budget Series

BUDGET SERIES REVERSE OSMOSIS SYSTEMS

720 lt / day - 75 m³ / day Stainless steel,
Reverse Osmosis is the membrane filtration process for obtaining pure water, which separates all unwanted minerals from water, applied to waters where conventional treatment systems are insufficient (seawater, water with high conductivity, well waters, etc.). This process continues until osmotic equilibrium is achieved. Reverse osmosis is the reversal of this osmotic flow. Aqualine reverse Osmosis Systems successfully ensures that pure water is obtained as a result of this process. In addition, Aqualine Reverse Osmosis Systems can be produced in different design styles according to customer requests

STANDARD FEATURES

  • Membrane vessels FRP or Stainless steel
  • TFC Spiral wound membranes 2,5 ”and 4” diameter
  • SS304 stainless steel vertical centrifugal high pressure pump (BT 340-BT1540 devices)
  • Brass body rotary type high pressure pump (for BT 125/1 -BT 240 devices)
  • St-37 epoxy painted carbon steel skid
  • 5 Micron precision cartridge filter
  • Low and high pressure pipes U-PVC / Zonder
  • Automatic valves solenoid valve
  • Pressure regulating valve at pump outlet and wastewater line (BT 340 - BT1540 devices)​
  • Low pressure switch
  • Product water and waste water scratch flow meters
  • Glycerine manometers
  • Product water conductivity indicator
  • RO electronic control card
  • 220 V / 50Hz / 1ph (for BT 125/1 -BT 240 devices)
  • 380 V / 50Hz / 3ph (between BT 340-BT1540)
  • Antiscalant dosing system not included

INLET WATER LIMITS

DOCUMENTS
Inlet water TDS: 0 - 2,000 ppm
Inlet water pressure: 2 to 5 bar
Inlet water pH range: 6-8
Silica (SiO2) Tolerance: Maximum 25 ppm
Minimum and maximum inlet water temperature (10ºC - 30ºC)
Maximum Iron (Fe) tolerance: 0.05 ppm, if ASC is dosed 0.2 ppm
Hydrogen Sulfide should not be.
There should be no turbidity (NTU <1)
No oil or grease
SDI <5
There should be no microbiological pollution