top of page

ION EXCHANGE & POLISHING

IRON & MANGANESE

REMOVAL

Filtration systems with catalytic oxidation media that remove iron, manganese and hydrogen sulfide from well water, often with no chemicals at all.

Capacity

Media

Removes

Up to 1,500 m³/day

Catalytic oxidation

Iron, manganese, H₂S

5–90 m³/day

Peru Square Ministry Logo (59).png

OVERVIEW

NO MORE BROWN WATER & STAINS

Iron and manganese in well water cause brown or black stains, a metallic taste and a bad smell. They also block pipes, irrigation drippers, filters and RO membranes.

​

Catalytic media such as Filox R turn the dissolved iron and manganese into particles and filter them out, all in one vessel. In many cases no extra chemicals are needed, depending on the oxygen already in the water. The filter is backwashed automatically.

TYPICAL USES

- Well water for drinking

​

- Pretreatment before RO

​

- Hotels, laundries and buildings

​

- Irrigation and drip systems

HOW IT WORKS

INSIDE A IRON REMOVAL FILTER

If needed, air or a small dose of oxidant is added first. The catalytic media then turns iron and manganese into particles, which are trapped in the bed and washed out by the automatic backwash.

STEP 1

Raw water​

Tap, well, river or sea

STEP 1

Well water

With dissolved iron and manganese

STEP 2

Oxidation

Air or dosing, only if needed

STEP 1

Raw water​

Tap, well, river or sea

STEP 3

Catalytic media

Turns iron and manganese into particles

STEP 1

Raw water​

Tap, well, river or sea

STEP 4

Backwash

Particles are washed out automatically

STEP 1

Raw water​

Tap, well, river or sea

STEP 5

Clear water

No stains, no metallic taste

KEY FEATURES

WHY CHOOSE OUR IRON & MANGANESE REMOVAL

No more stains

Clear water for sinks, laundry and equipment.

Automatic backwash

Timer-controlled, keeps the media working.

Catalytic media

Filox R removes iron, manganese and H₂S.

Little or no chemicals

Often works with the oxygen already in the water.

Protects RO and equipment

Stops iron fouling in membranes and pipes.

Automatic control

Runs by itself, with valves and controller.

SPECIFICATIONS

TECHNICAL DATA

Each system is sized for its water. Send us your water analysis with the iron and manganese levels to get the right model.

Capacity range

Up to 1,500 m³/day

Removes

Iron, manganese, hydrogen sulfide

Media

Catalytic oxidation media [e.g. Filox R]

Oxidation

[Air or chemical dosing, if needed]

Backwash

Automatic, timer-controlled

Vessel material

[FRP or epoxy-coated steel]

Outlet iron / manganese

[Below x mg/L]

GET A QUOTE FOR IRON & MANGANESE REMOVAL

Send us your water analysis with the iron and manganese levels.

bottom of page