top of page

ION EXCHANGE & POLISHING

NITRATE REMOVAL

SYSTEMS

Ion exchange systems with nitrate-selective resin that remove nitrate from well and ground water, for safe drinking water.

Capacity

Resin

Regeneration

Up to 1,500 m³/day

Nitrate-selective

Automatic, with salt

5–90 m³/day

Industrial Twin-Tank Nitrate Removal System.png

OVERVIEW

SAFE DRINKING WATER FROM NITRATE-POLLUTED WELLS

Fertilizers and wastewater can raise nitrate in well water above safe drinking water limits. High nitrate is a health risk, especially for babies. Nitrate removal systems use a special resin that captures nitrate and releases harmless chloride in its place.

​

Like a softener, the resin is regenerated automatically with salt brine, so running costs stay low. The nitrate-selective resin targets nitrate even when other salts are present.

TYPICAL USES

- Drinking water from wells

​

- Villages and rural communities

​

- Farms and agricultural areas

​

- Bottled water and food production

HOW IT WORKS

INSIDE A NITRATE REMOVAL SYSTEM

STEP 1

Raw water​

Tap, well, river or sea

STEP 1

Well water

High in nitrate

STEP 2

Pre-filtration

Removes solids

STEP 1

Raw water​

Tap, well, river or sea

STEP 3

Nitrate resin

Captures nitrate, releases chloride

STEP 1

Raw water​

Tap, well, river or sea

Well water is filtered, then flows through the nitrate-selective resin. When the resin is full, salt brine washes the nitrate out and the system is ready again.

STEP 4

Brine regeneration

Salt cleans the resin automatically

STEP 1

Raw water​

Tap, well, river or sea

STEP 5

Soft water

​Nitrate below drinking limits

KEY FEATURES

WHY CHOOSE OUR NITRATE REMOVAL SYSTEMS

Safe drinking water

Brings nitrate below drinking water limits.

Nitrate-selective resin

Targets nitrate, even with other salts present.

Automatic regeneration

Salt brine only, no acids.

Low running costs

The only consumable is salt.

Single or twin units

Twin units give safe water without interruption.

Automatic control

Regenerates by time or by water volume.

SPECIFICATIONS

TECHNICAL DATA

The full model table, with flows, resin volumes and salt use for each system, is in the datasheet.

Capacity range

Up to 1,500 m³/day

Removes

Nitrate (NO₃)

Resin

Nitrate-selective anion resin

Regeneration

Automatic, with salt brine

Outlet nitrate

[Below x mg/L]

Vessel material

[FRP or epoxy-coated steel]

Configuration

Single, twin 

GET A QUOTE FOR NITRATE REMOVAL SYSTEMS

Send us your water analysis with the nitrate level and the flow you need.

bottom of page