top of page

WASTEWATER TREATMENT PLANTS

INDUSTRIAL EFFLUENT

(ETP)

Effluent treatment plants designed for each industry's wastewater, combining chemical, physical and biological treatment to meet discharge limits.

Capacity

Process

Format

Up to 4,000 m³/day

Tailored per industry

Large plant or skid

5–90 m³/day

Peru Square Ministry Logo (65)_edited.pn

OVERVIEW

EVERY INDUSTRY, ITS OWN TREATMENT

Industrial wastewater treatment covers the processes used to treat water contaminated by industrial or chemical activities. Every industry produces a different effluent, so there's no single standard solution.

​

We design each ETP around your effluent, combining chemical treatment, mechanical separation and biological treatment, so you meet your discharge limits reliably and, where possible, reuse the treated water.

TYPICAL USES

- Food, beverage and dairy plants

​

- Chemical and detergent plants

​

- Textile and manufacturing

​

- Oil, gas and petrochemical sites

HOW IT WORKS

A TYPICAL ETP TREATMENT TRAIN

The exact steps depend on your effluent. A typical plant equalizes the flow, treats it chemically, removes oils and solids, then finishes with biological treatment.

STEP 1

Screening and equalization

STEP 1

Raw water​

Tap, well, river or sea

Removes solids and balances the flow

STEP 2

Chemical treatment

pH correction, coagulation, flocculation

STEP 1

Raw water​

Tap, well, river or sea

STEP 3

DAF

Removes oils, grease and solids

STEP 1

Raw water​

Tap, well, river or sea

STEP 4

Biological treatment

Breaks down the organic load

STEP 1

Raw water​

Tap, well, river or sea

STEP 5

Discharge or reuse

Sludge dewatered, water released or reused

KEY FEATURES

WHY CHOOSE OUR ETP PLANTS

 TAILORED TREATMENT TRAIN

Designed around your effluent analysis.

REMOVES OILS AND GREASE

DAF and chemical treatment for difficult effluents.

HANDLES HIGH COD

Biological stages sized for high organic loads.

MEETS DISCHARGE LIMITS

Designed for your local requirements.

REUSE OPTION

Polish the effluent for reuse in your process.

COMPLETE SLUDGE HANDLING

Filter press dewatering included.

SPECIFICATIONS

TECHNICAL DATA

Every ETP is designed for its effluent. Send us your effluent analysis and flow, and we'll propose the right treatment train.

Capacity range

Up to 4,000 m³/day

Typical pollutants

Oils and grease, COD, TSS, metals, pH

Process train

Screening, equalization, chemical, DAF, biological

Format

Large plant or skid-mounted

Sludge handling

[Filter press dewatering]

GET A QUOTE FOR INDUSTRIAL EFFLUENT (ETP)

Send us your effluent analysis and daily flow.

bottom of page