HOW IT WORKS
WHERE EACH UNIT FITS IN THE PLANT
Each piece of equipment handles one stage of the treatment line. Use them to build a new plant, or to upgrade and extend an existing one. Odor control units can be added at any stage.
STEP 1
Raw water​
Tap, well, river or sea
STEP 1
Inlet
Coarse screens stop large debris
STEP 2
Fine screening
Fine screens remove hair and small solids
STEP 1
Raw water​
Tap, well, river or sea
STEP 3
Flocculation
Pipe flocculators bind small particles
STEP 1
Raw water​
Tap, well, river or sea
STEP 4
Flotation
DAF removes oils, grease and solids
STEP 1
Raw water​
Tap, well, river or sea
STEP 5
Sludge dewatering
Filter press turns sludge into dry cake
HOW IT WORKS
CHOOSE YOUR SYSTEM
.png)
.png)
.png)
.png)
.png)
.png)
QUICK GUIDE
WHICH SYSTEM IS RIGHT FOR YOU?
Start from your water source. If you are not sure, send us a water analysis and our engineers will recommend the right system.
YOUR WATER
RECOMMENDED SYSTEM
Large debris at the plant inlet
Coarse screens
Hair, fibres and small solids
Fine screens
Oils, grease and fats
Dissolved air flotation (DAF)
Chemical dosing and mixing
Pipe flocculators
Too much wet sludge
Filter press
Bad smells from the plant
Odor control units
APPLICATIONS
WHERE OUR WASTEWATER TRETAMENT PLANTS ARE USED